JAC Series
-
Hot selling direct fit catalytic converter for JAC Refine 2.0 2.4 with round catalyst
Three-way catalytic converter, also called catalytic purifier. The device is installed in the exhaust system of the car. Its function is to use the catalyst in the converter to convert the carbon monoxide CO, hydrocarbons HC, and nitrogen oxides NOx in the engine exhaust gas into harmless gases.
-
Direct fit exhaust manifold catalyst converters for JAC TONG YUE RS 1.3 catalytic converter
For a three-way catalytic converter to exert its catalytic conversion efficiency, temperature is an important working condition. The temperature at which the three-way catalytic converter begins to function is about 260°C. The catalytic capacity that can be exerted at this temperature is about 50%. The temperature when the conversion efficiency exceeds 50% is usually called the catalytic converter ignition temperature. Most The temperature of the catalytic converter is in the range of 246~301℃. As the temperature rises, the catalytic conversion efficiency increases rapidly. When the temperature is between 480 and 870°C, the three-way catalytic converter will fully function. If the temperature is too high (over 950°C), it will accelerate the aging of the three-way catalytic converter catalyst, weaken the catalytic effect, and shorten the service life.
-
Exhaust manifold catalytic converter suitable for JAC RS catalyst
The three-way catalyst (TWC) is made of cordierite honeycomb ceramics as a carrier, rare earth composite oxides as additives, and a small number of precious metals (PD/PD/RH) added and sintered after a special coating process.
-
Top Quality Exhaust Three-Way Catalytic Converter for Jac Refine Xianghe M5 2.0T front catalytic converter
1.Use imported and domestic leading raw materials
2. The product has a good dispersion of precious metals
3. Lower ignition temperature -
High Quality Wholesale Custom Cheap Converters Ceramic Converter Catalytic Used For Jac Refine
The Three Way Catalyst is an extremely important purification device installed in a car’s exhaust system. It works by converting dangerous exhaust gases, such as CO, HC, and NOx, into harmlessifications carbon dioxide, water, and nitrogen through oxidation and reduction.
